New fireplaces burn differently than the wood fireplaces and stoves that you may have used in the past. There are two main categories that we can split most new appliances into: High Efficient and Low to Mid-efficient. It is good…
Today’s new wood burning appliances require dry wood to operate properly. Imperfect wood fuel is the number one issue for our customers (not enough heat, dirty glass, too much smoke, blower not coming on, chimney getting dirty too quickly….) Wood Fuel Information and Tips 1. It’s almost impossible to purchase dry wood that has been piled (wood in the middle of the pile does not dry) 2. The best place to store wood is in a stack outside, covered on top, and in a place where wind and sunshine can reach…
Some newer fireplaces offer the homeowner the flexibility to turn the fireplace pilot light on or off from the remote. This is called Intermittent Pilot Ignition or IPI for short. Although this can be done easily for many fireplaces, Chantico (along with most fireplace manufacturers) recommend that the pilot light remain ‘on’ at all times – especially during the cold season. Although a continuous pilot (CPI) will use…
Preventative maintenance and cleaning helps maintain fireplace efficiency and ensures overall visual appearance over its lifespan. If not cleaned regularly, mineral deposits can permanently etch the glass and can build up on the fireplace burner or plug burner holes. In addition to mineral deposits, insects and dirt can also contribute to plugging burner holes or valves, and increasing the risk of…
Most fireplaces require a ‘fire-up’ or ‘burn-in’ phase. During this initial burn the glues and paints will cure in the fireplace. Each fireplace is different, so please review your manual for specific steps. During the first fire-up, you will notice a foul odour which may set off smoke detectors…